# Rule interaction

**URL:** <https://forums.wyze.com/t/rule-interaction/86469>\
**Category:** Cameras\
**Tags:** not-platform-specific\
**Created:** [January 28, 2020, 7:22pm UTC](https://forums.wyze.com/t/rule-interaction/86469 "2020-01-28T19:22:09Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![rodney.hexter](https://avatars.discourse-cdn.com/v4/letter/r/9fc348/32.png) [@rodney.hexter](https://forums.wyze.com/u/rodney.hexter)\
**Post date:** [January 28, 2020, 7:22pm UTC](https://forums.wyze.com/t/rule-interaction/86469/1 "2020-01-28T19:22:09Z")

</div>

Being a newbie, I hope you will excuse me if this is old. I have a camera with SD card recording motion as it happens. I also set a rule to turn on/off the same camera with door sensor open/close. So of course there is a conflict- when the door is closed it turns the camera off. Is there a solution or is it one rule per camera etc? Thanks, Rodney

---

<div class="post-metadata">

**Author:** ![Omgitstony](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/omgitstony/32/7449_2.png) [@Omgitstony](https://forums.wyze.com/u/Omgitstony)\
**Post date:** [January 28, 2020, 8:16pm UTC](https://forums.wyze.com/t/rule-interaction/86469/2 "2020-01-28T20:16:05Z")

</div>

If you want that, since the camera is only “on” when the door is open, just set the camera to continuous record.
