# Robot Vacuum forgets where it's at

**URL:** <https://forums.wyze.com/t/robot-vacuum-forgets-where-its-at/157775>\
**Category:** Home\
**Tags:** robot-vacuum, not-platform-specific\
**Created:** [January 22, 2021, 2:33am UTC](https://forums.wyze.com/t/robot-vacuum-forgets-where-its-at/157775 "2021-01-22T02:33:52Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![justin.feist](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@justin.feist](https://forums.wyze.com/u/justin.feist)\
**Post date:** [January 22, 2021, 2:33am UTC](https://forums.wyze.com/t/robot-vacuum-forgets-where-its-at/157775/1 "2021-01-22T02:33:52Z")

</div>

The last several days my vacuum consistently forgets where it’s at. I will initiate a cleaning and 30-60 seconds afterwards it all of a sudden thinks it, and the dock, are somewhere else in the house. I’ve attached two screenshots:  
Charging.png - This is when the vacuum is charging and is the correct location.  
Lost.png - This is what happened this last time after about a minute. It thinks it’s in another room altogether…the office (as well as the dock)

It does this every time. The vacuum is completely useless at this point. I have submitted a ticket to Wyze Support, but have yet to hear back. Any wise words of wisdom about this?

 ![Charging](https://us1.discourse-cdn.com/wyze/original/3X/b/8/b86f2c11552a0128dfde09b36df0d55ef8999bde.png) ![Lost](https://us1.discourse-cdn.com/wyze/original/3X/1/5/15257e94c95294809a1dd60c4b90d23b37f72a8a.png)

---

<div class="post-metadata">

**Author:** ![wolfcorner](https://avatars.discourse-cdn.com/v4/letter/w/e47774/32.png) [@wolfcorner](https://forums.wyze.com/u/wolfcorner)\
**Post date:** [January 22, 2021, 6:25am UTC](https://forums.wyze.com/t/robot-vacuum-forgets-where-its-at/157775/2 "2021-01-22T06:25:42Z")

</div>

I just started getting this problem as well. Additionally, my vacuum now all of a sudden has a very hard time docking itself and has now failed to do so and died on each of the past two cleanings since updating to the most recent app version.

---

<div class="post-metadata">

**Author:** ![thanatrix](https://avatars.discourse-cdn.com/v4/letter/t/3be4f8/32.png) [@thanatrix](https://forums.wyze.com/u/thanatrix)\
**Post date:** [January 22, 2021, 11:09pm UTC](https://forums.wyze.com/t/robot-vacuum-forgets-where-its-at/157775/3 "2021-01-22T23:09:34Z")

</div>

This happened to me after two successful cleanings. It “relocated” itself to the opposite end of my house! I could not fix it so I deleted the map and had the vacuum remap the house. It has worked properly since doing that.

I was especially confused because the first mapping missed two rooms. I simply set the vac in each room and told it to clean again and it successfully mapped them both correctly and in the right places in the overall map.

---

<div class="post-metadata">

**Author:** ![justin.feist](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@justin.feist](https://forums.wyze.com/u/justin.feist)\
**Post date:** [January 24, 2021, 7:38pm UTC](https://forums.wyze.com/t/robot-vacuum-forgets-where-its-at/157775/4 "2021-01-24T19:38:22Z")

</div>

Well, we’ll see. I deleted the map and let it re-map the house. Only done that initial cleaning so far. Fingers crossed…
