# Robot Vac Selecting Rooms Bug

**URL:** <https://forums.wyze.com/t/robot-vac-selecting-rooms-bug/190949>\
**Category:** Home\
**Tags:** robot-vacuum, android\
**Created:** [July 26, 2021, 8:19pm UTC](https://forums.wyze.com/t/robot-vac-selecting-rooms-bug/190949 "2021-07-26T20:19:01Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![stchambers](https://avatars.discourse-cdn.com/v4/letter/s/bc8723/32.png) [@stchambers](https://forums.wyze.com/u/stchambers)\
**Post date:** [July 26, 2021, 8:19pm UTC](https://forums.wyze.com/t/robot-vac-selecting-rooms-bug/190949/1 "2021-07-26T20:19:01Z")

</div>

Recently, I’ve been experiencing a problem when manually selecting rooms to clean. From the map screen, I can see the names of my rooms, but cannot select them. The normal schedules work fine - this issue only exists when starting a manual cleaning.

The only way I’ve been able to get it to work is to press the “Clean” button, let it run for a minute or so, then stop the job and tell it to return to base. After it returns, I can select the room(s) I want to clean.

I’m on the latest versions of the app and firmware:

Android App: 2.22.21  
Vacuum Firmware: 1.6.126

Any idea what might be causing this behavior?

---

<div class="post-metadata">

**Author:** ![FastHackem](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/fasthackem/32/26779_2.png) [@FastHackem](https://forums.wyze.com/u/FastHackem)\
**Post date:** [July 26, 2021, 10:30pm UTC](https://forums.wyze.com/t/robot-vac-selecting-rooms-bug/190949/2 "2021-07-26T22:30:17Z")

</div>

I’ve been having this same issue for a good long while now and have submitted a couple of reports with logs through the app. I too found the only way around it is to start the “clean the whole house” option, pause, and then stop the cleaning. I don’t wait a minute. It works if you just do the steps as fast as possible. Then the map refreshes and allows me to select the individual rooms I wanted to clean.

I’m on a Pixel 5 running beta app v2.23.12 and vacuum on v1.6.130.

---

<div class="post-metadata">

**Author:** ![stchambers](https://avatars.discourse-cdn.com/v4/letter/s/bc8723/32.png) [@stchambers](https://forums.wyze.com/u/stchambers)\
**Post date:** [July 27, 2021, 12:02am UTC](https://forums.wyze.com/t/robot-vac-selecting-rooms-bug/190949/3 "2021-07-27T00:02:39Z")

</div>

Here’s a new twist. I tried selecting rooms manually on my Samsung Tab A7, and it worked fine. Same app version (2.22.21).

I immediately tried it on my phone (also a Pixel 5), and it worked there too. Go figure.
