Real Time Streaming Protocol (RTSP)

Yes, you can use TinyCam as leverage into RTSP compatibility for the V3.

Search google for wyze cam 3 hcix, apparently you can view the stream from VLC. I haven’t had time to try it, but when I have it I will. Pros - you can still watch the camera in Wyze app.

You can also do that while using the TinyCam workaround. (And you don’t have to touch camera, firmware, or Wyze app.)

I have one friend using bluestack on win 10 just fine, and another using Tinycam pro

I just finished installing the new RTSP in my cam v2 but cannot find the 2.3 app. I type wyze in the play store but it just says installed. My version is 2.20.21. I’d like to try the new feature but can’t find 2.3 TIA

This thread is from 2019 as is the very old app 2.3 you are referring to , 2.20.21 is the most current production app

1 Like

Ok, I have 2.20.21 however the RTSP is not in the advanced tab and I ran the firmware update. Any suggestions? Thank you

Any reason why I am not seeing the update on the app store. I am currently running version 2.20.142. Please let me know. Thanks.

So… still no night mode. :roll_eyes:

when does this come to v3 and or doorbell?

Yes, IF you have an Android mobile device.
The hack works, although not great (stream is not as solid as on the v2 with rtsp support) but you can add now the v3 to BlueIris or watch in VLC.
Good enough for now

1 Like

It will never come to the doorbell, and I have my doubts if it will ever come to the WC3.
If you want a doorbel with RTSP look here

1 Like

Is ANYONE listening to WYZE cam v3 customers and potential buyers? WE WANT RTSP for the v3… PLEASE let me have it

I totally agree. I would have purchased new ones, but since they don’t support it, not gonna happen.

This was published in the notes of the June AMA;

Original Response:
RTSP for v3 is getting closer! Development is now complete and it is in internal testing with Wyze employees. My guess is that it will be released within the next 3-4 months, if testing goes well .
RTSP for v3 will be released the same way it was for v2. It will be a separate firmware that won’t get updated as frequently.
The overall percentage of Wyze users that use RTSP is actually extremely low, but we know how important this is for that small percentage of core users! We are 100% committed to getting it done , it might just take a little extra time compared to some other features.
Outdoor Cam most likely will not get RTSP because it’s battery-powered. Next on the list would probably be the doorbell, but we haven’t really looked at that yet .

FYI

3 Likes

I’ve been patient. Not going to complain about how long it’s taken/taking. There are features of the V3 that will make a nice upgrade to replace some of my V2 units; RTSP is necessary for my security system.

I’d contribute something to the developers’ coffee fund if it would help. :grinning_face_with_smiling_eyes:

I’m hoping they do a better job on the V3 RTSP. The V2 is not stable. Keeps dropping connection. They should also allow RTSP to work with Cam Plus, Only because I still have time on the licenses. Then I’ll just rely on Blue Iris,

But my guess is, they’ll make it unstable to try to keep Cam plus customers. If they want custom for that, they need to offer a better solution than $1.25 per month per camera. That is expensive if you have 10 cameras. They also need to offer a web version to monitor Cam Plus cameras. On the phone is not a good platform

Ok this turned into something of a surprise.

Had to replace a failed router and turned on OFDMA along with smart connect and now the wyze cam using rtsp is rock solid. (AX20)

Hasn’t disconnected once since i changed things over.

Looks like this went and made the cameras actually useful …talk about shocking.

Wyze Cam v3 RTSP output setup procedure for WINDOWS ONLY. Not for use on any windows computer with less than 8gb memory.
https://drive.google.com/file/d/12EsjdTHkye2hXsyRD3qtSekO4tZZ1CgI/view?usp=sharing

HELP…anyone know the Shinobi full Stream URL to get Wzye Cam v3 video working in Shinobi NVR windows browser app when the camera is sending rtsp thru GitHub - mrlt8/docker-wyze-bridge: RTMP/RTSP/HLS bridge for Wyze cams in a docker container ?