# Power light blinking slowly after 1.6.213 firmware update

**URL:** <https://forums.wyze.com/t/power-light-blinking-slowly-after-1-6-213-firmware-update/324080>\
**Category:** Home\
**Tags:** robot-vacuum\
**Created:** [February 19, 2025, 1:58pm UTC](https://forums.wyze.com/t/power-light-blinking-slowly-after-1-6-213-firmware-update/324080 "2025-02-19T13:58:03Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![purchark](https://avatars.discourse-cdn.com/v4/letter/p/c57346/32.png) [@purchark](https://forums.wyze.com/u/purchark)\
**Post date:** [February 19, 2025, 7:02pm UTC](https://forums.wyze.com/t/power-light-blinking-slowly-after-1-6-213-firmware-update/324080/2 "2025-02-19T19:02:08Z")

</div>

If the buttons won’t respond properly, you can try doing a forced reboot:

> [@Wyze robotic vacuum dead](https://forums.wyze.com/t/wyze-robotic-vacuum-dead/315765/2):
>
> If all that checks out, the vacuum might need to be rebooted. To do that, remove the main brush, then remove the 4 screws holding the battery cover on. Then carefully lift the battery out and disconnect it. Wait a minute, reassemble and keep your fingers crossed.

---

_[View the full topic](https://forums.wyze.com/t/power-light-blinking-slowly-after-1-6-213-firmware-update/324080)._