# Outdoor Camera and TinyCamPro

**URL:** <https://forums.wyze.com/t/outdoor-camera-and-tinycampro/116000>\
**Category:** Cameras\
**Created:** [August 8, 2020, 7:52pm UTC](https://forums.wyze.com/t/outdoor-camera-and-tinycampro/116000 "2020-08-08T19:52:53Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![HoustonVol](https://avatars.discourse-cdn.com/v4/letter/h/3ab097/32.png) [@HoustonVol](https://forums.wyze.com/u/HoustonVol)\
**Post date:** [August 8, 2020, 7:52pm UTC](https://forums.wyze.com/t/outdoor-camera-and-tinycampro/116000/1 "2020-08-08T19:52:53Z")

</div>

Is there anyway firmware you can use to put RTSP on the new outdoor camera so that tiny cam pro will work?

---

<div class="post-metadata">

**Author:** ![WyzeJasonJ](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/wyzejasonj/32/8461_2.png) [@WyzeJasonJ](https://forums.wyze.com/u/WyzeJasonJ)\
**Post date:** [August 8, 2020, 9:12pm UTC](https://forums.wyze.com/t/outdoor-camera-and-tinycampro/116000/2 "2020-08-08T21:12:02Z")

</div>

I dont believe you need RTSP for TinyCamPro to work

---

<div class="post-metadata">

**Author:** ![HoustonVol](https://avatars.discourse-cdn.com/v4/letter/h/3ab097/32.png) [@HoustonVol](https://forums.wyze.com/u/HoustonVol)\
**Post date:** [August 8, 2020, 9:37pm UTC](https://forums.wyze.com/t/outdoor-camera-and-tinycampro/116000/3 "2020-08-08T21:37:19Z")

</div>

Well then how do you can get tinycam to see the camera? It logs into my wyze cam v2 just fine and into the wyze ptz. Tried changing channels around but that doesnt help. I get a P2P Failed to connect by UID error

---

<div class="post-metadata">

**Author:** ![Ken.S](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/ken.s/32/232_2.png) [@Ken.S](https://forums.wyze.com/u/Ken.S)\
**Post date:** [August 8, 2020, 11:03pm UTC](https://forums.wyze.com/t/outdoor-camera-and-tinycampro/116000/4 "2020-08-08T23:03:30Z")

</div>

> **[r/tinycam - tinyCam 14.6 Beta brings Wyze Cam Outdoor support](https://www.reddit.com/r/tinycam/comments/i1nl91/tinycam_146_beta_brings_wyze_cam_outdoor_support/)**
>
> 12 votes and 15 comments so far on Reddit

---

<div class="post-metadata">

**Author:** ![Customer](https://avatars.discourse-cdn.com/v4/letter/c/e19b73/32.png) [@Customer](https://forums.wyze.com/u/Customer)\
**Post date:** [August 9, 2020, 1:41am UTC](https://forums.wyze.com/t/outdoor-camera-and-tinycampro/116000/5 "2020-08-09T01:41:41Z")

</div>

TinyCam might or might not ever support WCO via Wyze credentials (don’t know), but I doubt RTSP will ever work for WCO, for technical reasons. (RTSP must be running and the WCO is sleeping.)

---

<div class="post-metadata">

**Author:** ![Ken.S](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/ken.s/32/232_2.png) [@Ken.S](https://forums.wyze.com/u/Ken.S)\
**Post date:** [August 9, 2020, 12:01pm UTC](https://forums.wyze.com/t/outdoor-camera-and-tinycampro/116000/6 "2020-08-09T12:01:53Z")

</div>

What are you talking about? I just posted the link above showing that TinyCam now supports the WCO

---

<div class="post-metadata">

**Author:** ![HoustonVol](https://avatars.discourse-cdn.com/v4/letter/h/3ab097/32.png) [@HoustonVol](https://forums.wyze.com/u/HoustonVol)\
**Post date:** [August 9, 2020, 2:00pm UTC](https://forums.wyze.com/t/outdoor-camera-and-tinycampro/116000/7 "2020-08-09T14:00:57Z")

</div>

Ken your solution worked thank you very much.

---

<div class="post-metadata">

**Author:** ![Customer](https://avatars.discourse-cdn.com/v4/letter/c/e19b73/32.png) [@Customer](https://forums.wyze.com/u/Customer)\
**Post date:** [August 9, 2020, 5:00pm UTC](https://forums.wyze.com/t/outdoor-camera-and-tinycampro/116000/8 "2020-08-09T17:00:20Z")

</div>

Sorry I was responding to the original poster and had not read your link. Thus “don’t know”. And the poster had specifically asked about RTSP which you did not address.