# Newbie Question About IFTTT

**URL:** <https://forums.wyze.com/t/newbie-question-about-ifttt/20119>\
**Category:** Cameras\
**Created:** [February 27, 2019, 4:35pm UTC](https://forums.wyze.com/t/newbie-question-about-ifttt/20119 "2019-02-27T16:35:50Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Preston](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/preston/32/4348_2.png) [@Preston](https://forums.wyze.com/u/Preston)\
**Post date:** [February 27, 2019, 4:35pm UTC](https://forums.wyze.com/t/newbie-question-about-ifttt/20119/1 "2019-02-27T16:35:51Z")

</div>

Due to an issue with our apartment management, we have decided it is necessary to get cameras for our apartment. After some research I went with WYZE. In doing my research, I did find out that you can use IFTTT to do geolocation and have the cameras turn on or have the motion detection turn on when we leave and turn off when one of us gets home. My question about this is:  
When I set up the cameras, do I just keep all the settings on default?

Thanks in advance. Sorry if this is a repeat question. If so please let me know and I will remove it and search for the original post.

---

<div class="post-metadata">

**Author:** ![tsatrans](https://avatars.discourse-cdn.com/v4/letter/t/ee7513/32.png) [@tsatrans](https://forums.wyze.com/u/tsatrans)\
**Post date:** [February 27, 2019, 5:36pm UTC](https://forums.wyze.com/t/newbie-question-about-ifttt/20119/2 "2019-02-27T17:36:41Z")

</div>

I would think you’d want to set things in the camera app to your liking, i.e. if you are using a mSD card (which I would presume you would if you are trying to capture something more than 12 seconds and with the 5-min cooldown), you’ll want to set it for either continuous or record on motion. You may want to set a detection zone, etc. Then just use IFTTT to turn on or off the motion detection. I don’t think you can set it up for multi-person geofencing, or I could be wrong. I use a combination of IFTTT and Stringify to have it turn things on and off depending on when the last person leaves or the first person arrives.

---

<div class="post-metadata">

**Author:** ![Preston](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/preston/32/4348_2.png) [@Preston](https://forums.wyze.com/u/Preston)\
**Post date:** [February 27, 2019, 6:00pm UTC](https://forums.wyze.com/t/newbie-question-about-ifttt/20119/3 "2019-02-27T18:00:24Z")

</div>

Thank you @tsatrans. I did find an article through this community that shows how to set up with multi-person geofencing using IFTTT and Life360. I will link it below.

Original Discussion:

> [@Shared camera and IFTTT integration](https://forums.wyze.com/t/shared-camera-and-ifttt-integration/5340):
>
> I have just ordered a couple of these and had some questions that I didn’t see answered when I searched the forum. Here’s what I’m trying to accomplish: My wife and I will want access. I have the main account and I know that I can share it with her, but she won’t really have any way to change settings. I’d like to use the “push notification when motion is detected” feature, but was hoping to use IFTTT to turn it on/off as I leave the house (via the geofencing feature). In order for my wife to d…

Article with IFTTT and Life360:

> **[Guide To Using IFTTT For Multi-User Geofencing](https://homealarmreport.com/smart-home/how-to-use-ifttt-with-multi-user-geofencing/)**
>
> When reviewing security products, especially cameras, geofencing is one of the features we look for. Geofencing is a technology that allows you to create a virtual boundary around a certain area (e.g., your home) wherein your current location in...

---

<div class="post-metadata">

**Author:** ![tsatrans](https://avatars.discourse-cdn.com/v4/letter/t/ee7513/32.png) [@tsatrans](https://forums.wyze.com/u/tsatrans)\
**Post date:** [February 27, 2019, 6:26pm UTC](https://forums.wyze.com/t/newbie-question-about-ifttt/20119/4 "2019-02-27T18:26:16Z")

</div>

I just meant I didn’t think you could do it with IFTTT alone. 🙂 Good luck!

---

<div class="post-metadata">

**Author:** ![tsatrans](https://avatars.discourse-cdn.com/v4/letter/t/ee7513/32.png) [@tsatrans](https://forums.wyze.com/u/tsatrans)\
**Post date:** [February 27, 2019, 6:30pm UTC](https://forums.wyze.com/t/newbie-question-about-ifttt/20119/5 "2019-02-27T18:30:14Z")

</div>

Ok, haha, I just realized I don’t use IFTTT & Stringify for that one, I actually do use IFTTT & Life360. Funny! I combine IFTTT & Stringify for some other automations.

---

<div class="post-metadata">

**Author:** ![Preston](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/preston/32/4348_2.png) [@Preston](https://forums.wyze.com/u/Preston)\
**Post date:** [February 27, 2019, 6:38pm UTC](https://forums.wyze.com/t/newbie-question-about-ifttt/20119/6 "2019-02-27T18:38:41Z")

</div>

Gotcha. I will let you know if it works for us. I am hoping it does.

---

<div class="post-metadata">

**Author:** ![Loki](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/loki/32/1595_2.png) [@Loki](https://forums.wyze.com/u/Loki)\
**Post date:** [February 27, 2019, 8:55pm UTC](https://forums.wyze.com/t/newbie-question-about-ifttt/20119/7 "2019-02-27T20:55:29Z")

</div>

You can do single-phone geofence with IFTTT alone because the IFTTT phone app supports a geolocation trigger.

For multi-phone geo, you need a third party tool such as Life360.
