# Mounting outdoor cam base

**URL:** <https://forums.wyze.com/t/mounting-outdoor-cam-base/155205>\
**Category:** Cameras\
**Tags:** iphone-ipad\
**Created:** [January 11, 2021, 4:33pm UTC](https://forums.wyze.com/t/mounting-outdoor-cam-base/155205 "2021-01-11T16:33:04Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![jdeaton](https://avatars.discourse-cdn.com/v4/letter/j/f475e1/32.png) [@jdeaton](https://forums.wyze.com/u/jdeaton)\
**Post date:** [January 11, 2021, 4:33pm UTC](https://forums.wyze.com/t/mounting-outdoor-cam-base/155205/1 "2021-01-11T16:33:04Z")

</div>

While mounting my new Outdoor Camera Base I found out that the holes that the provided screws were supposed to go thru were too small. I had to drill them out enough to allow the screw head to go thru so that I could then mount the base.  
I’ve sent this issue to Wyze in the hope that they will make a change to their mold so we don’t have to be creative to mount the camera.

---

<div class="post-metadata">

**Author:** ![Antonius](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/antonius/32/106761_2.png) [@Antonius](https://forums.wyze.com/u/Antonius)\
**Post date:** [January 11, 2021, 7:15pm UTC](https://forums.wyze.com/t/mounting-outdoor-cam-base/155205/2 "2021-01-11T19:15:47Z")

</div>

Are you talking about the base for mounting the outdoor cam?. I drilled a small hole in the siding of the house (Wood) put the screw in about 98% of the way, hung the cam base on the screw shaft then finished tightening the screw so it was snug,. Then I adjusted the cam detection zone and tightened the screw so it was tight, no problem.

[![](https://us1.discourse-cdn.com/wyze/original/3X/0/7/07fab7799cc12ff6e8ede1f3d5b4891612a76b25.jpeg "How to set up Wyze Cam Outdoor") ](https://www.youtube.com/watch?v=OuXBdr9zzOM)

---

<div class="post-metadata">

**Author:** ![jdeaton](https://avatars.discourse-cdn.com/v4/letter/j/f475e1/32.png) [@jdeaton](https://forums.wyze.com/u/jdeaton)\
**Post date:** [January 11, 2021, 7:43pm UTC](https://forums.wyze.com/t/mounting-outdoor-cam-base/155205/3 "2021-01-11T19:43:21Z")

</div>

That’s exactly what I’m talking about. The supplied screw head could not go thru the opening on the back side of the bracket without tremendous force!

---

<div class="post-metadata">

**Author:** ![jdeaton](https://avatars.discourse-cdn.com/v4/letter/j/f475e1/32.png) [@jdeaton](https://forums.wyze.com/u/jdeaton)\
**Post date:** [January 11, 2021, 7:45pm UTC](https://forums.wyze.com/t/mounting-outdoor-cam-base/155205/4 "2021-01-11T19:45:35Z")

</div>

I watched the video and it doesn’t show or mention force at all. I’ve got another cam arriving today and I’ll check it out when it comes.

---

<div class="post-metadata">

**Author:** ![Antonius](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/antonius/32/106761_2.png) [@Antonius](https://forums.wyze.com/u/Antonius)\
**Post date:** [January 11, 2021, 8:30pm UTC](https://forums.wyze.com/t/mounting-outdoor-cam-base/155205/5 "2021-01-11T20:30:35Z")

</div>

I give up 🤨 it’s simple. The base hangs on the shaft of the screw,. The screw is tightened so the head of the screw is flush and tight against the back of the base not though the hole ???/

---

<div class="post-metadata">

**Author:** ![Big\_monkey](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/big_monkey/32/71881_2.png) [@Big\_monkey](https://forums.wyze.com/u/Big_monkey)\
**Post date:** [January 11, 2021, 8:34pm UTC](https://forums.wyze.com/t/mounting-outdoor-cam-base/155205/6 "2021-01-11T20:34:59Z")

</div>

@Antonius, he is well aware of that sir, if the problem is widespread then he is hoping that Wyze will adjust the slot size to allow the screw head to enter it easier.

---

<div class="post-metadata">

**Author:** ![Antonius](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/antonius/32/106761_2.png) [@Antonius](https://forums.wyze.com/u/Antonius)\
**Post date:** [January 11, 2021, 8:38pm UTC](https://forums.wyze.com/t/mounting-outdoor-cam-base/155205/7 "2021-01-11T20:38:07Z")

</div>

What can I say, I installed 4 cams without issue.

---

<div class="post-metadata">

**Author:** ![Big\_monkey](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/big_monkey/32/71881_2.png) [@Big\_monkey](https://forums.wyze.com/u/Big_monkey)\
**Post date:** [January 11, 2021, 8:38pm UTC](https://forums.wyze.com/t/mounting-outdoor-cam-base/155205/8 "2021-01-11T20:38:51Z")

</div>

Defects happen… It’s part of life

---

<div class="post-metadata">

**Author:** ![Antonius](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/antonius/32/106761_2.png) [@Antonius](https://forums.wyze.com/u/Antonius)\
**Post date:** [January 11, 2021, 8:50pm UTC](https://forums.wyze.com/t/mounting-outdoor-cam-base/155205/9 "2021-01-11T20:50:19Z")

</div>

The young lady in the video had no problem either 😁

---

<div class="post-metadata">

**Author:** ![jdeaton](https://avatars.discourse-cdn.com/v4/letter/j/f475e1/32.png) [@jdeaton](https://forums.wyze.com/u/jdeaton)\
**Post date:** [January 11, 2021, 8:58pm UTC](https://forums.wyze.com/t/mounting-outdoor-cam-base/155205/10 "2021-01-11T20:58:34Z")

</div>

I’m afraid if they use a smaller head screw we won’t be able to use enough torque using any cross point screwdriver without ruining the screw. When I used the the supplied screw I almost ruined it because it’s made of “soft” metal. I used a brass screw from my workbench instead.  
To me, the answer is t have them adjust the hole size appropriately.

---

<div class="post-metadata">

**Author:** ![jdeaton](https://avatars.discourse-cdn.com/v4/letter/j/f475e1/32.png) [@jdeaton](https://forums.wyze.com/u/jdeaton)\
**Post date:** [January 11, 2021, 9:04pm UTC](https://forums.wyze.com/t/mounting-outdoor-cam-base/155205/11 "2021-01-11T21:04:52Z")

</div>

I agree with you. But, if you mount as shown in the video, you first install the screw into wood, then you hang the mount by putting the head of the screw through the hole, slide it up into the slot, align the base, and tighten to hold.  
I could NOT get the screw head through the hole without using a bit to widen it.  
It’s on and doing great. I love their new outdoor weather proof camera.

---

<div class="post-metadata">

**Author:** ![jdeaton](https://avatars.discourse-cdn.com/v4/letter/j/f475e1/32.png) [@jdeaton](https://forums.wyze.com/u/jdeaton)\
**Post date:** [January 11, 2021, 9:08pm UTC](https://forums.wyze.com/t/mounting-outdoor-cam-base/155205/12 "2021-01-11T21:08:20Z")

</div>

I know. I’m a semi pro woodworker with many talents and can easily follow her simple instructions.
