# Monitor Uptime of Camera

**URL:** <https://forums.wyze.com/t/monitor-uptime-of-camera/49481>\
**Category:** Services & Integrations\
**Tags:** not-platform-specific\
**Created:** [August 9, 2019, 2:35pm UTC](https://forums.wyze.com/t/monitor-uptime-of-camera/49481 "2019-08-09T14:35:12Z")\
**Posts on this page:** 1\
**Showing post:** 17

<div class="post-metadata">

**Author:** ![jschutzm](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/jschutzm/32/10302_2.png) [@jschutzm](https://forums.wyze.com/u/jschutzm)\
**Post date:** [August 23, 2019, 8:51pm UTC](https://forums.wyze.com/t/monitor-uptime-of-camera/49481/17 "2019-08-23T20:51:35Z")

</div>

**HOW TO MONITOR WYZE CAM v2 UPTIME EXTERNALLY**

Wyze Cam v2 will respond on TCP port 22306 to unauthenticated requests. If you allow this port through from the internet (sometimes referred to as ‘port forwarding’) then you can essentially verify if your camera is powered and connected to your home network. The below instructions are a rough guide on how to configure this for 1 camera. If you have more than 1 Wyze Cam, then you can still use this guide, but it will get a little more complicated. You’ll have to map separate incoming ports to different internal IPs on your network.  
**DISCLAIMER:** This guide is provided ‘as-is’ with no support, warranty, or guarantees implied or expressly stated. Follow these steps at your own risk. Changing your router/firewall settings comes with some inherent risks and could allow external attackers to probe for vulnerabilities on your Wyze Cam v2, Wyze Pan Cam or other devices. _Hack at your own risk!_

The best way to describe this process is to think of it as creating a rule which tells your home router that if someone from the internet (in this case, the monitoring service) attempts a connection on port 22306, then the router should redirect or ‘forward’ this request to a single device on the inside of your home network (the Wyze Cam). Without this rule, your router will ignore anyone on the internet who tries to talk to it, directly (other than ports used to surf the internet such as 80 or 443)

1. Determine the IP address used by your Wyze Cam. Easiest way to do this is to: A) Connect to your Wyze cam via the app. B) Settings \> Device Info. The IP address of your Wyze Cam should be listed in the app.

2. Find the make / model of your home router. You will use this information in order to look up instructions on how to set a static IP and forward ports.

3. Google how to configure a device to use a static IP for your particular router. Some routers you have to know the MAC address of your Wyze Cam, while others will let you choose from a drop down menu. Set your router to give your Wyze Cam the same IP address everytime it starts up.

4. Select a FREE website monitoring service. One which is legitimate and sells other services for a profit and which has been around for a while. Ideally, verify that they are owned and operated in whichever country you reside in, so that there is less concerns with conflicting political ideologies or rogue nation state involvement. Google “top 10 free website monitoring services” or something similar.  
Examples: [16 Best Online Services to Monitor Sites Uptime](https://geekflare.com/monitor-website-uptime/)  
[10 Free Services to Monitor Your Site's Uptime | Mashable](https://mashable.com/2010/04/09/free-uptime-monitoring/)  
UptimeRobot is an example of a FREE service that will monitor your Wyze Cam every 5 minutes. They are hosted out of Dallas TX - so if you live in the U.S. this is a fairly safe bet.

5. Signup for a FREE service from monitoring website identified in step1

6. Google "how to port forward [_make / model of your router_] Example: “how to port forward linksys wrt54g”

7. Log into your home router and follow the instructions that you found on the internet for port forwarding port 22306 on your particular type of router. Each router is a bit different, but generally you will click on some sorta advanced networking section and look for a tab or section called “port forwarding” or “trigger ports” or even “virtual servers” – again, it depends on your router which is why googling the instructions for your particular make/model is crucial.

8. Add a port fowarder or trigger port or virtual server for TCP 22306 by clicking Add or +. If your router has an option to do BOTH UDP and TCP, then you might as well select ‘both’

9. Open your browser and type in “Whats my IP” to find out what the IP address of your router is.

10. Log into the monitoring service that you signed up for, earlier.

11. Add a new monitor and enter the IP address from your ‘whats my ip’. Specify a custom port of 2306 and save the entry.

---

_[View the full topic](https://forums.wyze.com/t/monitor-uptime-of-camera/49481)._
