# Lightstrip Pro Strip Connectors and Controller to Strip Extension **URL:** \ **Category:** Power & Lighting\ **Tags:** light-strip-pro\ **Created:** [November 17, 2021, 8:54pm UTC](https://forums.wyze.com/t/lightstrip-pro-strip-connectors-and-controller-to-strip-extension/202786 "2021-11-17T20:54:29Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![Biff](https://avatars.discourse-cdn.com/v4/letter/b/3d9bf3/32.png) [@Biff](https://forums.wyze.com/u/Biff)\ **Post date:** [November 17, 2021, 8:54pm UTC](https://forums.wyze.com/t/lightstrip-pro-strip-connectors-and-controller-to-strip-extension/202786/1 "2021-11-17T20:54:30Z")
I can make this work with what came in the box but it won’t be an elegant solution. As a retired software developer I like elegant solutions, so… I need a T connector and a few 90 degree strip connectors. I saw a post that had an answer pointing to some 90 degree lightstrip connectors on Amazon. Would any 3 pin connector work or is there a specific designation for the strip or connector I should be looking for? How about connector extensions for between the controller and the light strip? Is this type of thing available off the shelf? Is there a specific designation for the extension type? ---
**Author:** ![K6CCC](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/k6ccc/32/1591_2.png) [@K6CCC](https://forums.wyze.com/u/K6CCC)\ **Post date:** [November 17, 2021, 9:24pm UTC](https://forums.wyze.com/t/lightstrip-pro-strip-connectors-and-controller-to-strip-extension/202786/2 "2021-11-17T21:24:39Z")
Maybe the same thread where I posted that most of the clamp on strip connectors are likely garbage. Don’t waste your money. Here is my longer answer in the other thread. [Cut and Reconnect The Wyze light strip & light strip pro - #9 by K6CCC](https://forums.wyze.com/t/cut-and-reconnect-the-wyze-light-strip-light-strip-pro/201672/9) For extending the controller to start of the strip, a soldering iron and some wire is your best bet. Yes, it will void the warrantee.