# I'm needing help

**URL:** <https://forums.wyze.com/t/im-needing-help/347880>\
**Category:** Home\
**Tags:** thermostat\
**Created:** [November 16, 2026, 1:57am UTC](https://forums.wyze.com/t/im-needing-help/347880 "2026-11-16T01:57:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![BIGJ8481](https://avatars.discourse-cdn.com/v4/letter/b/8edcca/32.png) [@BIGJ8481](https://forums.wyze.com/u/BIGJ8481)\
**Post date:** [November 16, 2026, 1:57am UTC](https://forums.wyze.com/t/im-needing-help/347880/1 "2026-11-16T01:57:28Z")

</div>

I have a electric central unit in my house. How ever someone disconnected the transformer and fan. I have no clue in what color to connect to where

Inside the furnace there are 5 wires striped and not connected. Colors are red with a fuse. Black with white stripe. . Red going to a heating element it looks like. Yellow . And black. There’s 1 more wire with a slip connector I’m not sure if it needs to be hooked up.

On the transformer there is red /black/white/orange. Other side is light blue and yellow. Can someone help me with this issue please . Also the fan I’m hooking up will have a red black blue and white wire

 ![17947934902244444091531027570573](https://us1.discourse-cdn.com/wyze/original/3X/5/a/5a93ff76a5e19193f848cfff7ca02ccb00b496b0.jpeg)

---

<div class="post-metadata">

**Author:** ![aircendro](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/aircendro/32/124245_2.png) [@aircendro](https://forums.wyze.com/u/aircendro)\
**Post date:** [November 18, 2026, 3:04pm UTC](https://forums.wyze.com/t/im-needing-help/347880/2 "2026-11-18T15:04:05Z")

</div>

First thing: kill the power at the breaker before touching any of those wires — with the transformer disconnected you are one wrong connection away from shorting the 24V side and blowing the fuse (or the transformer itself).

What you describe sounds like a standard electric furnace setup, and the colors mostly follow the usual convention:

- The red wire with the fuse is almost certainly R (24V hot) from the transformer secondary.
- The other transformer secondary wire (the light blue or yellow on yours) is C, the common.
- At the thermostat the usual mapping is R = red, W = white (heat call), G = green (fan), Y = yellow (cooling). On the furnace side those land on the heat sequencer (W) and the fan relay (G).

Before reconnecting anything, look for the wiring diagram — it is usually printed on a label inside the furnace/blower door, and it shows exactly which transformer leads feed the board. If the label is gone, a photo of the transformer nameplate and the control board would help a lot, and a multimeter check of the transformer secondary (should read about 24V) tells you which two wires are the low-voltage pair. Do not guess on the 120V/240V primary side — that is where it gets dangerous. If the diagram is missing and the wires are a mess, this is a good job for a local tech to sort out in person.
