# Firmware 4.9.6.218 motion tagging very sensitive **URL:** \ **Category:** Cameras\ **Tags:** not-platform-specific\ **Created:** [November 19, 2020, 5:12pm UTC](https://forums.wyze.com/t/firmware-4-9-6-218-motion-tagging-very-sensitive/143350 "2020-11-19T17:12:26Z")\ **Posts on this page:** 1\ **Showing post:** 7
**Author:** ![Brlepage](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/brlepage/32/21184_2.png) [@Brlepage](https://forums.wyze.com/u/Brlepage)\ **Post date:** [November 20, 2020, 1:35am UTC](https://forums.wyze.com/t/firmware-4-9-6-218-motion-tagging-very-sensitive/143350/7 "2020-11-20T01:35:16Z")
> [@charlesclloyd](#): > > Just upgraded ALL 11 cams (V2) to Firmware 4.9.6.218. Most are looking outdoors. The sensitivity of the motion tagging seems to have gone WAY up (ie it never goes off now) and I am seeing a surge in 12-second events to the cloud. This is due to the updated algorithm. You may need to adjust settings. Direct questions here: > [@Motions sensitivity is too sensitive with new update on Wyze camera](https://forums.wyze.com/t/motions-sensitivity-is-too-sensitive-with-new-update-on-wyze-camera/143363/13): > > In this new firmware (ver. 4.x.6.218), we upgraded the vision algorithm for motion detection. Depending on the specific scenario, some movements (such as moving leaves and tree branches) may be more sensitive to the vision algorithm. We recommend using the green rectangle that is generated by the motion tagging to identify the motion detection zones. The green rectangle indicates the largest rectangle of the moving objects. The motion detection is triggered when there is an overlap between you… --- _[View the full topic](https://forums.wyze.com/t/firmware-4-9-6-218-motion-tagging-very-sensitive/143350)._