# Error Codes

**URL:** <https://forums.wyze.com/t/error-codes/116722>\
**Category:** Cameras\
**Tags:** not-platform-specific\
**Created:** [August 11, 2020, 6:40pm UTC](https://forums.wyze.com/t/error-codes/116722 "2020-08-11T18:40:56Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![philzzz](https://avatars.discourse-cdn.com/v4/letter/p/87869e/32.png) [@philzzz](https://forums.wyze.com/u/philzzz)\
**Post date:** [August 11, 2020, 6:40pm UTC](https://forums.wyze.com/t/error-codes/116722/1 "2020-08-11T18:40:56Z")

</div>

Is there a listing available, of some of the more common error codes? My cameras have gone from being really reliable, to cutting in and out and offering different codes, such as 27 & 20010. Also, when I try to go back and check recordings, it’s become a struggle. While I’m typing this two of my cameras have cut out - whoop now a 3rd one went out, but came back up. The other two are trying to re-connect, but are showing a connection failed error. Now they’re all back on. This is with WiFi at near 100%. There goes #2… #2 gave me an error code of 20010. Doesn’t look like #2 is going to reconnect on its own - I’ll have to get involved. Which makes these cameras completely unreliable. This type of activity - or inactivity happens whether I’m using the app through my Pixel, or using the app on my Mac through the use of BlueStacks. #2 is now offline - grrreat… This is also happening while I have them setup in a group - if that makes a difference. None of this happened when I first set them up, but they have seemed to have become really unreliable after the last couple of “upgrades”. Thank you.

---

<div class="post-metadata">

**Author:** ![gku2](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/gku2/32/26578_2.png) [@gku2](https://forums.wyze.com/u/gku2)\
**Post date:** [August 11, 2020, 6:53pm UTC](https://forums.wyze.com/t/error-codes/116722/2 "2020-08-11T18:53:11Z")

</div>

> **[What do different error codes mean](https://support.wyze.com/hc/en-us/articles/360031128912-What-do-different-error-codes-mean-)**
>
> If your camera gives you an error code, there is likely an issue with connectivity. The table below tells you what each error code means. This can help you track down why there is a connection erro...

> [@Error codes -20010 and -27 on camera group](https://forums.wyze.com/t/error-codes-20010-and-27-on-camera-group/25257):
>
> Am running iOS V2.2.40 on my iPad Pro and have a created a group consisting of two V2 cameras. After selecting the group, I often get “Connection failed (error code:-20010)” on one camera and “Connection failed (error code:-27)” on the other. Thoughts?

> [@Error Codes - What do they mean?](https://forums.wyze.com/t/error-codes-what-do-they-mean/4141):
>
> So I first contact Wyze Labs about two weeks ago. I was getting all sorts of error codes when trying to connect to my cameras. The errors are sporadic, unpredictable and senseless. I know what some of them mean, but in the matter of 10 minutes, I can get all of the following: Error Code 60 Error Code 90 (this is typically during boot or when my Wemo Outlets are off by accident) Error Code 42 Error Code 20011 Error Code 20010 Error Code 20002 New one to ADD Error Code 41 Another new o…