# Dual Door Bell Parts **URL:** \ **Category:** Cameras\ **Tags:** duo-cam-doorbell, android\ **Created:** [April 9, 2026, 12:17am UTC](https://forums.wyze.com/t/dual-door-bell-parts/342251 "2026-04-09T00:17:09Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![911plow](https://avatars.discourse-cdn.com/v4/letter/9/ed655f/32.png) [@911plow](https://forums.wyze.com/u/911plow)\ **Post date:** [April 9, 2026, 12:17am UTC](https://forums.wyze.com/t/dual-door-bell-parts/342251/1 "2026-04-09T00:17:09Z")
The tiny locking part that falls out of the dual doorbell cam making it useless that tiny little thing have somebody replicated and launch it up on bambu handy so we can 3D print them out what a hassle i spent ton of money for that it’s garbage because of a tiny 11 millionth of a cent part ---
**Author:** ![spamoni](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/spamoni/32/34695_2.png) [@spamoni](https://forums.wyze.com/u/spamoni)\ **Post date:** [April 9, 2026, 12:22am UTC](https://forums.wyze.com/t/dual-door-bell-parts/342251/2 "2026-04-09T00:22:57Z")
Welcome @911plow Which Locking part are you talking about? The part that locks the Dual Doorbell to the plate? I do 3D Printing and have an ability to create parts, as I have done in the past. If it is something that I can create, I would be glad to ---
**Author:** ![911plow](https://avatars.discourse-cdn.com/v4/letter/9/ed655f/32.png) [@911plow](https://forums.wyze.com/u/911plow)\ **Post date:** [April 9, 2026, 1:06am UTC](https://forums.wyze.com/t/dual-door-bell-parts/342251/3 "2026-04-09T01:06:22Z")
When you push the Unlock Pin thru the top hole to unlock it’s the tiny piece you push down to unlock. It fits into a small square hole . The “tiny clip” or small plastic piece you’re describing is almost certainly related to the locking/release mechanism on the mounting bracket (back plate). What Likely Happened Wyze doorbells snap onto a wall plate or angled wedge with plastic tabs/clips or hooks at the bottom and a locking tab at the top. To remove the camera unit, you typically: Insert a thin tool (the included Doorbell Detaching Pin for newer Duo models, or a paperclip/SIM eject tool for others) into a small pinhole at the top of the doorbell. This pushes a small internal release lever or tab inside the mechanism. ---
**Author:** ![911plow](https://avatars.discourse-cdn.com/v4/letter/9/ed655f/32.png) [@911plow](https://forums.wyze.com/u/911plow)\ **Post date:** [April 9, 2026, 1:08am UTC](https://forums.wyze.com/t/dual-door-bell-parts/342251/4 "2026-04-09T01:08:06Z")
This is a known weak point in the design for some Wyze doorbells (the clips/tabs aren’t super robust after repeated removals for charging). ---
**Author:** ![911plow](https://avatars.discourse-cdn.com/v4/letter/9/ed655f/32.png) [@911plow](https://forums.wyze.com/u/911plow)\ **Post date:** [April 9, 2026, 1:21am UTC](https://forums.wyze.com/t/dual-door-bell-parts/342251/5 "2026-04-09T01:21:49Z")
A part this small and unreliable ( charged 4 times ) before failure could be added to Bambu Handy for free prints or add 4 extra in box. Thank you !!! I will be packing up and returning and buying something else. Even though I do like but without that piece is no good. ---
**Author:** ![Crease](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/crease/32/123254_2.png) [@Crease](https://forums.wyze.com/u/Crease)\ **Post date:** [April 9, 2026, 1:26am UTC](https://forums.wyze.com/t/dual-door-bell-parts/342251/6 "2026-04-09T01:26:53Z")
Welcome to the Forum, @911plow! 👋 What did Wyze Support say when you [contacted them](https://support.wyze.com/hc/en-us/articles/21740817776923-How-do-I-contact-Wyze-Support) about the failed part? ---
**Author:** ![system](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/system/32/1_2.png) [@system](https://forums.wyze.com/u/system)\ **Post date:** [July 8, 2026, 1:27am UTC](https://forums.wyze.com/t/dual-door-bell-parts/342251/7 "2026-07-08T01:27:29Z")
Closed on July 8, 2026, 1:27am UTC This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.