# Cam Plus with Pan Cam

**URL:** <https://forums.wyze.com/t/cam-plus-with-pan-cam/119489>\
**Category:** Services & Integrations\
**Created:** [August 23, 2020, 2:59pm UTC](https://forums.wyze.com/t/cam-plus-with-pan-cam/119489 "2020-08-23T14:59:00Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![balla73](https://avatars.discourse-cdn.com/v4/letter/b/c68b51/32.png) [@balla73](https://forums.wyze.com/u/balla73)\
**Post date:** [August 23, 2020, 2:59pm UTC](https://forums.wyze.com/t/cam-plus-with-pan-cam/119489/1 "2020-08-23T14:59:00Z")

</div>

I have Cam Plus subscription with my living room Pan V2 camera. Currently I have no SD card in the camera though. My understanding was with Cam Plus, events would still be recorded to the cloud. I have tried filtering events with the Wyze app but don’t see any events listed. Do I need a SD card with the camera as well?

---

<div class="post-metadata">

**Author:** ![Brlepage](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/brlepage/32/21184_2.png) [@Brlepage](https://forums.wyze.com/u/Brlepage)\
**Post date:** [August 23, 2020, 4:56pm UTC](https://forums.wyze.com/t/cam-plus-with-pan-cam/119489/2 "2020-08-23T16:56:14Z")

</div>

**Welcome to the Wyze community!**  
You **don’t** need an SD card with Cam Plus. Make sure the camera is set to record.

---

<div class="post-metadata">

**Author:** ![balla73](https://avatars.discourse-cdn.com/v4/letter/b/c68b51/32.png) [@balla73](https://forums.wyze.com/u/balla73)\
**Post date:** [August 23, 2020, 4:58pm UTC](https://forums.wyze.com/t/cam-plus-with-pan-cam/119489/3 "2020-08-23T16:58:58Z")

</div>

I have event recording turned on when detecting motion, but it’s still not recording. I also filtered events with the camera has that Cam Plus and it says nothing to see here. The last event that showed up for that camera was on 8-17-20. It’s in my living room, so it should definitely be recording daily.

---

<div class="post-metadata">

**Author:** ![Brlepage](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/brlepage/32/21184_2.png) [@Brlepage](https://forums.wyze.com/u/Brlepage)\
**Post date:** [August 23, 2020, 5:00pm UTC](https://forums.wyze.com/t/cam-plus-with-pan-cam/119489/4 "2020-08-23T17:00:56Z")

</div>

Try removing/canceling CamPus then reinstalling it.

---

<div class="post-metadata">

**Author:** ![balla73](https://avatars.discourse-cdn.com/v4/letter/b/c68b51/32.png) [@balla73](https://forums.wyze.com/u/balla73)\
**Post date:** [August 23, 2020, 5:03pm UTC](https://forums.wyze.com/t/cam-plus-with-pan-cam/119489/5 "2020-08-23T17:03:39Z")

</div>

I just removed CamPlus then reactivated it. My motion sensitivity setting is at 39. Should I raise it some?

---

<div class="post-metadata">

**Author:** ![Brlepage](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/brlepage/32/21184_2.png) [@Brlepage](https://forums.wyze.com/u/Brlepage)\
**Post date:** [August 23, 2020, 5:23pm UTC](https://forums.wyze.com/t/cam-plus-with-pan-cam/119489/6 "2020-08-23T17:23:45Z")

</div>

I’d try putting into 100 for testing. Then you can put it down to 50 and test again. After you could bring it down more if you need to.

---

<div class="post-metadata">

**Author:** ![balla73](https://avatars.discourse-cdn.com/v4/letter/b/c68b51/32.png) [@balla73](https://forums.wyze.com/u/balla73)\
**Post date:** [August 23, 2020, 5:54pm UTC](https://forums.wyze.com/t/cam-plus-with-pan-cam/119489/7 "2020-08-23T17:54:59Z")

</div>

I had to delete the device and add it again. I activated the Cam Plus for the camera and everything is working now. I’m able to see events now.
