# Cam-pan-v3 Detection Zone/Track Motion Inop

**URL:** <https://forums.wyze.com/t/cam-pan-v3-detection-zone-track-motion-inop/332586>\
**Category:** Cameras\
**Tags:** bug, cam-pan-v3\
**Created:** [June 22, 2025, 6:05am UTC](https://forums.wyze.com/t/cam-pan-v3-detection-zone-track-motion-inop/332586 "2025-06-22T06:05:34Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![pincushion79](https://avatars.discourse-cdn.com/v4/letter/p/bbe5ce/32.png) [@pincushion79](https://forums.wyze.com/u/pincushion79)\
**Post date:** [June 22, 2025, 6:05am UTC](https://forums.wyze.com/t/cam-pan-v3-detection-zone-track-motion-inop/332586/1 "2025-06-22T06:05:34Z")

</div>

FW 4.50.14.3339.

Before, the cam was able to have Detection Zone on, and Track Motion enabled.  
Track motion and detection zone work great together. I want my camera to track whatever enters the detection zone until said thing leaves the view of the camera. It used to work this way until a firmware update messed it up.

---

<div class="post-metadata">

**Author:** ![G2740](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/g2740/32/84897_2.png) [@G2740](https://forums.wyze.com/u/G2740)\
**Post date:** [June 25, 2025, 4:26pm UTC](https://forums.wyze.com/t/cam-pan-v3-detection-zone-track-motion-inop/332586/2 "2025-06-25T16:26:44Z")

</div>

I don’t know if such a bug popped up, Same camera firmware version. Not that it hasn’t.

I have detection zones on mine and I have track motion on without any issues I’m aware of.

If you open your pan cam v3 and click the gear those settings underneath slide left to right as you probably know. Is track motion toggled on.

---

<div class="post-metadata">

**Author:** ![p2788deal](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/p2788deal/32/117361_2.png) [@p2788deal](https://forums.wyze.com/u/p2788deal)\
**Post date:** [June 25, 2025, 5:40pm UTC](https://forums.wyze.com/t/cam-pan-v3-detection-zone-track-motion-inop/332586/3 "2025-06-25T17:40:15Z")

</div>

They no longer allow both “Track Motion” and detection zone to be set at the same time. As a workaround, set waypoint #1 where your detection zone used to point.

---

<div class="post-metadata">

**Author:** ![G2740](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/g2740/32/84897_2.png) [@G2740](https://forums.wyze.com/u/G2740)\
**Post date:** [June 25, 2025, 7:12pm UTC](https://forums.wyze.com/t/cam-pan-v3-detection-zone-track-motion-inop/332586/4 "2025-06-25T19:12:39Z")

</div>

Must be why mine work, they all have waypoints.

---

<div class="post-metadata">

**Author:** ![system](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/system/32/1_2.png) [@system](https://forums.wyze.com/u/system)\
**Post date:** [September 23, 2025, 7:12pm UTC](https://forums.wyze.com/t/cam-pan-v3-detection-zone-track-motion-inop/332586/5 "2025-09-23T19:12:40Z")

</div>

Closed on September 23, 2025, 7:12pm UTC

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.