Allow schedule AND event to control shortcut / rule triggers

Yes it is …one of my shortcuts was updated to the new system as well.
Looks to provide everything I wanted… Great job… Thanks

Moderator Note: The email signature containing personal information has been manually removed from this post. The forum software attempts to automatically remove email signatures but it is not always successful. When replying to the forum by email, it is best to remove the signature block yourself before sending.

would be great if you add calendar days to event recording in order to target specific in the week. Am sure many users prefer to not record while they @ home. For example weekends. Thank you

Welcome to the community, @amd121. I have moved your post to this one. The feature you’re looking for is currently in testing. :slight_smile:

1 Like

Would be nice if we can complete this but I don’t see anything in rules :frowning:

If motion sensor is the kitchen and when there is motion I have it set to turn in the kitchen lights. But how can I say if there is motion turn on the kitchen lights but after 9 pm don’t turn in the lights if there’s motion.

Are you running the beta? I do not know if it has made it to the main line build

1 Like

You create a device trigger and enable time.

1 Like


I don’t think I am. Where can I get that from and would it help?

Thanks for helping me out it’s greatly appreciated and wished this was an option.


I don’t have the time option on tigger. Is that how you have it? I’m using an iPhone. Do I need to be in beats for this option? Is so how can I get it.

Note the tag at the top of this topic says “testing”. That means it’s in beta. When launched in the production app, it will say “launched”.

Please read through How to Use the Wishlist and How to Read the Roadmap

How to join beta: Become a Beta Tester – Wyze

Please be aware that beta software may not be stable.


Thanks. I will join the beta family.

I’d like the ability to define a trigger that only goes off during a certain time range. For example, I have a contact sensor that turns on a bulb, but this is useful only during evening/night, and just an annoyance during the day.

So ideally there would be an option to add a time range during which the trigger is active, like maybe 5pm-7am. Fixed start/end times would be totally fine to start with, but it would be even better if the time range could be defined in terms of sunset and sunrise, with an optional fixed offset – in my example, I’d set the trigger to be active 60 minutes before sunset until 30 minutes after sunrise.

1 Like

I have several of the Wyze products. I have the bulbs, sensors, plugs, and several cameras. I have put one of the plugs on my car port where I have a cam-pan located. I set up a rule that went the camera detects motion to turn the plug on (which I have lights plugged into) so that when I am getting out/in my car I will be able to see my surroundings. One thing I’ve noticed is that the camera detects a lot of motion and I would love to be able to make a rule that only is valid during a certain period of time. For example I would love to be able to say only trigger the rule for motion during the hours of 8pm - 5am so the lights are not being turning on during the day when they are not needed. This would be nice to have with the Wyze bulbs too. I love the Wyze products and plan to get many more products. I tell anyone and everyone I can about them because they are amazingly made and amazingly priced!

I added a siren that is triggered by motion detection and when some of the contact sensors are open. Like an alarm sistema. I really wish I could group the triggers for all sensors and not have to do it individually. Also enable/disable triggers with a shortcut!

An alert when the door is open a certain length of time is helpful, but one that came up at 9 or 10pm to tell me the door is still open would be the best!! So often I forget to close the door, at least I’ll get footage of them stealing the cars I guess.

1 Like

Any update on this one?

Would be nice to add time lapse to the rules to allow scheduling automatic repeating time lapse at a set time period every day.

Any update on this feature?

We also need sunrise and sunset for option for the IF time in rules!

Anyone else having trouble with Plug schedules not working correctly?

I created a schedule for the plug to turn on at sunrise and off at 11p. It worked fine for about 2 weeks. Now it doesn’t turn on, but does turn off correctly. When I go in to check the schedule, it tells me what time sunrise will be tomorrow, so it seems to sunrise still be scheduled correctly.