Air Purifier, disable front panel display

@macnicol - see here:

1 Like

At the very least you’d think Wyze would have the AQI numbers below 10 not light up the zero’s. So when my AQI is say 5, I don’t need the extra brightness of the two zero’s showing 005.

1 Like

Air Purifier Display

I’d like to put in a feature request to be able to run the fan on turbo with the display off or dimmed. The noise from the fan is perfect to sleep by, but the display is too bright.

I’d also like to be able to set a rule for the turbo setting to come on and off.

1 Like

If they added a usb charging port and a small speaker that only played white noise, I could almost justify an air cleaner in every room

@Loki how does this voting process work in terms of how many votes are needed to make a necessary feature part of the dev teams production timeline?

Thanks in advance.

There is not a specific number of votes that triggers inclusion in Wyze’s roadmap for development. The relative voting rank of wishlist topics is only one of a very many factors that affects the decision to research, develop and implement a subject. Among these factors are potential development cost (there are many, many wishes competing for limited development resources), interaction with other products/features, ease of implementation, etc. I’m sorry I don’t have any more insight I can provide.

The best way to get more information on Wyze’s plans is to participate in Wyze staff events such as the AMA happening tomorrow: AMA with Wyze VP of Product, Steve McIrvin - 6/15/2022 1:00 PM Pacific


I have a roll of automotive window tint film for applications like this. Goes on with a little spray and a squeegee, comes off if needed. I have a few things that I’ve treated this way.

Seems like such a simple fix, we want dim or display off but more fan options. Manual fan selection is fine both by using touch buttons on the unit/display or via app.

On the unit, using the buttons, you should be able to hit fan speed then tap sleep symbol and it turns off display. If someone wants a lower fan speed , tap buttons to desired fan and then tap sleep again.

App is just as easy. Pick fan speed, then Hit sleep mode.

1 Like

Wyze Air Purifier LED lights toggle on/off on Auto Mode

I would like the option to turn off/on the led lights on Auto mode instead of just on Sleep mode.


This is currently in beta testing and will be available in the next production Air Purifier firmware release.


Thank you for the information!

1 Like

Thanks for the update @Seapup. Glad to see this so close to production.

We appreciate Wyze taking the constructive feedback.


For whatever reason my air purifier appears to have had the option for awhile
now. The only problem is it does nothing. :roll_eyes:

I am not on the beta program either FWIW.

1 Like

I received and activated my Wyze Air Purifier yesterday (woo!) and have not found any information on the LED Display setting toggle. I noticed it did not affect functionality on the device and started looking around on the forums. ¯_(ツ)_/¯

For everyone looking to dim the display… buy a sheet of LED Light Blocking Stickers on Amazon - - cheap, non-damaging solution while we wait for the official software fix.

Black tape is cheap, and works fine.

1 Like

Residue though.

What Firmware Version are you running on the Air Purifier ad the App version you are running?

I am using the following:

Android App version:
iOS App version:

Air purifier Firmware Version:
Plugin version on Android:
Plugin version on iOS: 2.38.0

On my devices I have the LED Display Toggle as shown in an earlier post. However, mine will turn off the LED Display.

LED toggle also does nothing on latest firmware with latest updated app on iOS

1 Like

Lighter fluid, alcohol, window cleaner, or Goo-Gone will all clean any residue without harming the plastic at all.

Firmware ver 1.0.10 App reports “Everything’s good, you’re up to date”, but somehow spamoni4 has :thinking:
Android App ver. 2.38.0 (153)

1 Like