Add More Actions for Wyze Rules

Need a way to pause a specific camera for a chosen amount of time then it will go back to the previous setting automatically.

[Mod Note]: This is a merged #wishlist submission. The “Pause (wait) X seconds/minutes” action listed in the 1st post would allow this to be accomplished. E.g., create shortcut: turn off cam, pause X time, turn on cam. Remember to scroll up to the top and click the VOTE button.

I think it should be implemented that Sun Match mode can be toggled by shortcuts and schedules. What if I want to change my lights to red bedtime but not have to manually turn on sun match every morning?

[Mod Note]: This is a merged #wishlist submission. The “Activate Sun Match mode” action listed in the 1st post would allow this to be accomplished. Remember to scroll up to the top and click the VOTE button.

1 Like

I can’t find a mention of this, so sorry if I just missed it.

I would like “Turn on/off cam status light” to be an action that you could schedule. I turn them off at night or when no one’s home and turn them on when I’m here during the day.

3 Likes

Ability to trigger the doorbell chime within Wyze rules. This would add additional purpose to the doorbell chimes that we can already put all around our house.

[Mod Note]: This is a merged #wishlist submission. The “Activate Doorbell Chime” action listed in the 1st post would allow this to be accomplished. Remember to scroll up to the top and click the VOTE button.

1 Like

Add another person’s condition to a place. Example when I leave the house and my wife is not there activate a device. As I share my devices with her it would be possible to locate her.

2 posts were merged into an existing topic: Sort and group rules

Send Wyze Cam Pan to a specific Waypoint as an action

It would be great if there was an action to point the Wyze cam to a specific waypoint on a trigger. Example: when the door sensor opens the camera will swing around to look at the door.

[Mod Note]: This is a merged #wishlist submission. The “Pan Cam: move to a specific camera memorized position or waypoint” action listed in the 1st post would allow this to be accomplished. Remember to scroll up to the top and click the VOTE button.

2 Likes

We have drive way alarms & I would like for my interior camera to ‘hear’ the alarm tone , then, activate the driveway cameras, before their motions sensor see the action. Reason being WYZW will notify my cell phone sooner

1 Like

Temp change color of bulb and revert back after detecting person, animal, etc.

I would like to be able to set a rules to flash by bulb color if it sees a person a certain color by camera. So if camera 1 sees a person to change the color of blub A for x seconds or to be able to flash that bulb a certain color and then back then go back to the previous state. It would be nice to be able to have a blub turn red momentarily if it detects a person, dog, etc and then go back to it’s previous color so I was aware someone was near my property. I don’t necessarily need to to stay that color though.

[Mod Note]: This is a merged #wishlist submission. The “Change Bulb brightness/color temp/color/on/off for X minutes then return to previous state” action listed in the 1st post would allow this to be accomplished. Remember to scroll up to the top and click the VOTE button.

1 Like

I have managed to do just this by using Alexa routines. Only issue is Alexa only uses person tracking but it appears to work on pets too, just not separate it out. So when motion is detected and I have Wyze set to person/pet tracking, Alexa sees it all as person and bulbs kick to a color for 1-60 minutes as set, then back to whatever state you want. Current issues is Alexa doesn’t see or know the pet/vehicle/person/package tags and sees all 4 as person and doing it with Alexa gives you a few seconds of delay which isn’t bad but in the case of home invasion or such is vital time needed to prepare.

1 Like

I’ll add my vote for:

  1. Turn device indicator light on/off. It would be nice to be able to add this action in with my “Sleep Mode” schedule.

  2. SD Recording on/off. I just put SDs in 2 of my cameras this week and was disappointed to find it didn’t behave as I expected. I thought setting it to “Events Only” would mean a motion detection would record to SD as well as going to the cloud. Turns out, SD is always recording motion detection, regardless of what your camera itself is set for. Since I have to turn SD recording off completely while we’re here to keep it from recording our every move, it’d be much more convenient to be able to schedule it automatically.

Please add time control feature to control how long you can turn on the wyze Outdoor plug then automatically turn off.

Use case: If the camera detects a person. Turn on the Outdoor plug for like 5, 10, 30, 60 mns…

[Mod Note]: This is a merged #wishlist submission. The “Pause (wait) X seconds/minutes” action listed in the 1st post would allow this to be accomplished. For example: If cam detects person > Turn oudoor plug on > Pause x minutes > Turn outdoor plug off. Remember to scroll up to the top and click the VOTE button.

For example;
I have my Wyze outdoor plug set to activate and turn on lights I have attached to it when my Wyze driveway camera see activity between 11pm and 6am. Kinda of a security light system. It works great except that there is no way to have it turn the lights back off after a certain time. They just stay on all night long.

[Mod Note]: This is a merged #wishlist submission. The “Pause (wait) X seconds/minutes” action listed in the 1st post would allow this to be accomplished. For example: If cam detects motion > turn outdoor plug on > pause x minutes > turn outdoor plug off. Remember to scroll up to the top and click the VOTE button.

I agree! I had some Philips Hue lights and could have Google Home activate a scene. Saying something like “Hey Google, set movie mode” was perfect. I’d love to do the same with Wyze color bulbs.

1 Like

I’ll also add another vote for “Activate the door chime”.

I’d buy a second chime and put it in my bedroom if I could have a rule for nighttime that connects the chime to an external door being opened. Separate chimes should be configurable. One chime for the doorbell but another for the door being opened. I believe there is a chime already listed that sounds like an alarm. Why someone would pick that as their doorbell I’m not sure, but it’d work well as an intruder alert.

New action suggestion:

Set (color) bulb to pre-defined scene.

The color and temperature selection controls when making rules are extremely clunky. This workaround would at least allow us to circumvent this while those get fixed.

2 Likes

List is so long, it’s difficult to find… but it’s already there:

  • Activate a Bulb Scene
1 Like

My apologies — I instead strongly second the existing suggestion.

Me too… I need bulb scene in actions badly. :+1:

1 Like

Color bulb “scenes” need to be accessible via rules

The color bulbs aren’t new. Why have a feature that lets you set a color scene for multiple bulbs (like special colors for Halloween or Christmas) but you can’t use that scene in a rule for when they turn on? All you can currently do is turn them on individually at a set color/brightness but that defeats the creation of scenes. Plus you can’t test the colors you are setting in the rules and they don’t allow the use of Hex or RGB colors to make sure you get consistent colors across multiple bulbs instead of the wonky color wheel chooser. It’s frustrating after owning them this long and scenes still aren’t implemented across the rules.

7 Likes