# Ability for Robot Vac to have multilevel maps, without needing user to switch manually

**URL:** <https://forums.wyze.com/t/ability-for-robot-vac-to-have-multilevel-maps-without-needing-user-to-switch-manually/154583>\
**Category:** Wishes Granted\
**Tags:** app, wish-granted\
**Created:** [January 8, 2021, 11:39pm UTC](https://forums.wyze.com/t/ability-for-robot-vac-to-have-multilevel-maps-without-needing-user-to-switch-manually/154583 "2021-01-08T23:39:38Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![Mingjia](https://avatars.discourse-cdn.com/v4/letter/m/43a26b/32.png) [@Mingjia](https://forums.wyze.com/u/Mingjia)\
**Post date:** [April 23, 2021, 11:07am UTC](https://forums.wyze.com/t/ability-for-robot-vac-to-have-multilevel-maps-without-needing-user-to-switch-manually/154583/21 "2021-04-23T11:07:32Z")

</div>

I have the same problem. I hope wyze can solve it as soon as possible.

---

<div class="post-metadata">

**Author:** ![jbbrown79](https://avatars.discourse-cdn.com/v4/letter/j/c0e974/32.png) [@jbbrown79](https://forums.wyze.com/u/jbbrown79)\
**Post date:** [April 28, 2021, 7:49pm UTC](https://forums.wyze.com/t/ability-for-robot-vac-to-have-multilevel-maps-without-needing-user-to-switch-manually/154583/22 "2021-04-28T19:49:49Z")

</div>

I just downloaded beta firmware 1.6.126 and it allows for multi-floor vacuuming. I just mapped a room upstairs and it’s vacuuming now!

You can also turn off the voice prompts!

---

<div class="post-metadata">

**Author:** ![a1goodidea](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/a1goodidea/32/38008_2.png) [@a1goodidea](https://forums.wyze.com/u/a1goodidea)\
**Post date:** [April 28, 2021, 8:01pm UTC](https://forums.wyze.com/t/ability-for-robot-vac-to-have-multilevel-maps-without-needing-user-to-switch-manually/154583/23 "2021-04-28T20:01:14Z")

</div>

👍 I will check it out. Thanks

---

<div class="post-metadata">

**Author:** ![Vacmaster](https://avatars.discourse-cdn.com/v4/letter/v/aeb1de/32.png) [@Vacmaster](https://forums.wyze.com/u/Vacmaster)\
**Post date:** [April 28, 2021, 8:23pm UTC](https://forums.wyze.com/t/ability-for-robot-vac-to-have-multilevel-maps-without-needing-user-to-switch-manually/154583/24 "2021-04-28T20:23:41Z")

</div>

But i see only firmware **1.6.113 (April 19, 2021)** available… where did you find 126???

---

<div class="post-metadata">

**Author:** ![MrSmartHome](https://avatars.discourse-cdn.com/v4/letter/m/8edcca/32.png) [@MrSmartHome](https://forums.wyze.com/u/MrSmartHome)\
**Post date:** [April 28, 2021, 8:29pm UTC](https://forums.wyze.com/t/ability-for-robot-vac-to-have-multilevel-maps-without-needing-user-to-switch-manually/154583/25 "2021-04-28T20:29:27Z")

</div>

Its a beta version of the firmware available in the beta version of the app.

> **[Become a Beta Tester](https://www.wyze.com/pages/become-a-beta-tester)**
>
> Thank you for your interest in our Beta Program! We greatly appreciate you joining our efforts to improve our products. As one of our beta testers, you will see new products, features, and bug fixes before they become public! Please keep in mind that...

---

<div class="post-metadata">

**Author:** ![Vacmaster](https://avatars.discourse-cdn.com/v4/letter/v/aeb1de/32.png) [@Vacmaster](https://forums.wyze.com/u/Vacmaster)\
**Post date:** [April 28, 2021, 8:53pm UTC](https://forums.wyze.com/t/ability-for-robot-vac-to-have-multilevel-maps-without-needing-user-to-switch-manually/154583/26 "2021-04-28T20:53:04Z")

</div>

Thanks I downloaded the beta Wyze app but for the vacuum it still only gives me the 113 version option ☹

 ![image](https://us1.discourse-cdn.com/wyze/original/3X/f/d/fd13476f908618ec171f5a2089e15cd1e443d1a7.jpeg)

---

<div class="post-metadata">

**Author:** ![jbbrown79](https://avatars.discourse-cdn.com/v4/letter/j/c0e974/32.png) [@jbbrown79](https://forums.wyze.com/u/jbbrown79)\
**Post date:** [April 28, 2021, 9:13pm UTC](https://forums.wyze.com/t/ability-for-robot-vac-to-have-multilevel-maps-without-needing-user-to-switch-manually/154583/27 "2021-04-28T21:13:03Z")

</div>

In the app, go to Account - About - Beta Program. Add the vacuum to receive beta firmware updates.

---

<div class="post-metadata">

**Author:** ![dale.speelman](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/dale.speelman/32/32846_2.png) [@dale.speelman](https://forums.wyze.com/u/dale.speelman)\
**Post date:** [April 28, 2021, 9:31pm UTC](https://forums.wyze.com/t/ability-for-robot-vac-to-have-multilevel-maps-without-needing-user-to-switch-manually/154583/28 "2021-04-28T21:31:11Z")

</div>

Multiple Floors are here!!! Game changer!!

Thanks team.

 ![IMG_1461.PNG](https://us1.discourse-cdn.com/wyze/original/3X/4/f/4fd9a13178e89394514d5017fc31c0b5f845ffa4.jpeg)

---

<div class="post-metadata">

**Author:** ![sambition](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/sambition/32/30046_2.png) [@sambition](https://forums.wyze.com/u/sambition)\
**Post date:** [April 28, 2021, 9:46pm UTC](https://forums.wyze.com/t/ability-for-robot-vac-to-have-multilevel-maps-without-needing-user-to-switch-manually/154583/29 "2021-04-28T21:46:18Z")

</div>

Yes!!

 ![Screenshot_20210428-174304](https://us1.discourse-cdn.com/wyze/original/3X/d/4/d494727ff4441967bfffaf385c26e8be43b03586.png)

---

<div class="post-metadata">

**Author:** ![jbbrown79](https://avatars.discourse-cdn.com/v4/letter/j/c0e974/32.png) [@jbbrown79](https://forums.wyze.com/u/jbbrown79)\
**Post date:** [April 28, 2021, 10:03pm UTC](https://forums.wyze.com/t/ability-for-robot-vac-to-have-multilevel-maps-without-needing-user-to-switch-manually/154583/30 "2021-04-28T22:03:50Z")

</div>

I like the ability to have multi maps, thanks for adding this!

When I did this for the first time, I brought the dock upstairs, let it quick map, then I removed the dock and it vacuumed. I wanted to see what would happen and if I needed the dock there. With the dock gone, it got confused when it finished vacuuming and it spun in circles trying to find it, so I stopped it.

It would be nice to map new floors without having to move the charging dock. Maybe allow users to specify what map has the dock? Then, users can add a new map, run a quick map, and vacuum without a dock on that level.

---

<div class="post-metadata">

**Author:** ![nirapavan](https://avatars.discourse-cdn.com/v4/letter/n/cdc98d/32.png) [@nirapavan](https://forums.wyze.com/u/nirapavan)\
**Post date:** [April 29, 2021, 2:48am UTC](https://forums.wyze.com/t/ability-for-robot-vac-to-have-multilevel-maps-without-needing-user-to-switch-manually/154583/31 "2021-04-29T02:48:18Z")

</div>

Are you guys with Andriod? I am not able to see it in iOS “126” and I am with Beta Program as well.

---

<div class="post-metadata">

**Author:** ![jbbrown79](https://avatars.discourse-cdn.com/v4/letter/j/c0e974/32.png) [@jbbrown79](https://forums.wyze.com/u/jbbrown79)\
**Post date:** [April 29, 2021, 2:53am UTC](https://forums.wyze.com/t/ability-for-robot-vac-to-have-multilevel-maps-without-needing-user-to-switch-manually/154583/32 "2021-04-29T02:53:22Z")

</div>

Yes, I have an Android phone. Do you have the most up-to-date version of the Wyze app? It needs to be version 2.20 or higher, I think.

And sometimes I think it just takes a few days to roll out to everyone.

---

<div class="post-metadata">

**Author:** ![nirapavan](https://avatars.discourse-cdn.com/v4/letter/n/cdc98d/32.png) [@nirapavan](https://forums.wyze.com/u/nirapavan)\
**Post date:** [April 29, 2021, 3:14am UTC](https://forums.wyze.com/t/ability-for-robot-vac-to-have-multilevel-maps-without-needing-user-to-switch-manually/154583/33 "2021-04-29T03:14:02Z")

</div>

Looks like it is with Android as of now. I will have to wait.

---

<div class="post-metadata">

**Author:** ![dale.speelman](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/dale.speelman/32/32846_2.png) [@dale.speelman](https://forums.wyze.com/u/dale.speelman)\
**Post date:** [April 29, 2021, 12:27pm UTC](https://forums.wyze.com/t/ability-for-robot-vac-to-have-multilevel-maps-without-needing-user-to-switch-manually/154583/34 "2021-04-29T12:27:21Z")

</div>

I have an iPhone and it works for me.

---

<div class="post-metadata">

**Author:** ![Seapup](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/seapup/32/118966_2.png) [@Seapup](https://forums.wyze.com/u/Seapup)\
**Post date:** [April 30, 2021, 3:42am UTC](https://forums.wyze.com/t/ability-for-robot-vac-to-have-multilevel-maps-without-needing-user-to-switch-manually/154583/35 "2021-04-30T03:42:40Z")

</div>

> [@nirapavan](#):
>
> I am not able to see it in iOS “126” and I am with Beta Program as well.

Try updating to the latest beta app for iOS… **2.20.131(7)**

Also, make sure your vacuum is running beta firmware **1.6.126**

---

<div class="post-metadata">

**Author:** ![a1goodidea](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/a1goodidea/32/38008_2.png) [@a1goodidea](https://forums.wyze.com/u/a1goodidea)\
**Post date:** [April 30, 2021, 2:30pm UTC](https://forums.wyze.com/t/ability-for-robot-vac-to-have-multilevel-maps-without-needing-user-to-switch-manually/154583/36 "2021-04-30T14:30:31Z")

</div>

Does anyone from wyze, @UserCustomerGwen, know how long the beta testing will be? I would rather use non-beta firmware for this feature, Also, what about Alexa commands?

---

<div class="post-metadata">

**Author:** ![icon123](https://avatars.discourse-cdn.com/v4/letter/i/73ab20/32.png) [@icon123](https://forums.wyze.com/u/icon123)\
**Post date:** [May 3, 2021, 4:36pm UTC](https://forums.wyze.com/t/ability-for-robot-vac-to-have-multilevel-maps-without-needing-user-to-switch-manually/154583/37 "2021-05-03T16:36:05Z")

</div>

I am buying a vacuum as soon as there is multi mapping available (in non-beta form). I’m curious, what is the procedure to map, select and vacuum the additional floors? I see someone mentioned that you need to move the base station for each floor. Is that true, if so, is it only for the mapping? Thanks,

---

<div class="post-metadata">

**Author:** ![cheaplikeafox](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/cheaplikeafox/32/9797_2.png) [@cheaplikeafox](https://forums.wyze.com/u/cheaplikeafox)\
**Post date:** [June 2, 2021, 2:53pm UTC](https://forums.wyze.com/t/ability-for-robot-vac-to-have-multilevel-maps-without-needing-user-to-switch-manually/154583/38 "2021-06-02T14:53:26Z")

</div>

Split this topic on June 2, 2021, 2:53pm UTC

6 posts were merged into an existing topic: [About Wyze Robot Vacuum Firmware 1.6.126](https://forums.wyze.com/t/about-wyze-robot-vacuum-firmware-1-6-126/179719/51)

---

<div class="post-metadata">

**Author:** ![mitchell.c.lane](https://avatars.discourse-cdn.com/v4/letter/m/bc8723/32.png) [@mitchell.c.lane](https://forums.wyze.com/u/mitchell.c.lane)\
**Post date:** [June 17, 2021, 3:46am UTC](https://forums.wyze.com/t/ability-for-robot-vac-to-have-multilevel-maps-without-needing-user-to-switch-manually/154583/39 "2021-06-17T03:46:35Z")

</div>

I have a split level room that’s too small to ever justify another smart vac so I see a lot of value in multi level support. If users have enough space on multiple levels then they would probably justify having multiple vacs so they don’t have to manually move them. Think this is key feature for one-off spaces.

---

<div class="post-metadata">

**Author:** ![aghaffari](https://avatars.discourse-cdn.com/v4/letter/a/d6d6ee/32.png) [@aghaffari](https://forums.wyze.com/u/aghaffari)\
**Post date:** [June 27, 2021, 3:39pm UTC](https://forums.wyze.com/t/ability-for-robot-vac-to-have-multilevel-maps-without-needing-user-to-switch-manually/154583/40 "2021-06-27T15:39:35Z")

</div>

How do you get to that screen that shows the multiple floors?

[Previous page](https://forums.wyze.com/t/ability-for-robot-vac-to-have-multilevel-maps-without-needing-user-to-switch-manually/154583.md?page=1)

[Next page](https://forums.wyze.com/t/ability-for-robot-vac-to-have-multilevel-maps-without-needing-user-to-switch-manually/154583.md?page=3)
