# 2.20+ app Beta test 5/14/2021 **URL:** \ **Category:** Beta\ **Created:** [May 14, 2021, 7:44pm UTC](https://forums.wyze.com/t/2-20-app-beta-test-5-14-2021/181393 "2021-05-14T19:44:05Z")\ **Posts on this page:** 20\ **Page:** 6
**Author:** ![spamoni](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/spamoni/32/34695_2.png) [@spamoni](https://forums.wyze.com/u/spamoni)\ **Post date:** [May 18, 2021, 8:32pm UTC](https://forums.wyze.com/t/2-20-app-beta-test-5-14-2021/181393/101 "2021-05-18T20:32:17Z")
Much appreciated. Nothing but patient here. 🙂 BTW: 4:30 pm Rule ran as expected and on time. 👍 Edit: I added my light triggers to start at 10 pm ET. In the past, setting my rule to trigger at 10 caused issues. I will report if it actually worked this time. I also set the Color Bulbs to come on Red. ---
**Author:** ![R.Good](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/r.good/32/107078_2.png) [@R.Good](https://forums.wyze.com/u/R.Good)\ **Post date:** [May 18, 2021, 8:35pm UTC](https://forums.wyze.com/t/2-20-app-beta-test-5-14-2021/181393/102 "2021-05-18T20:35:31Z")
@QiS For the **new rule** using a V1 motion sensor connected to the new Sense hub V2, where if the sensor detects motion to turn lights on, then turn off after 20 minutes of the room being clear. I observed the following event The Rule to trigger the lights on and off works as expected. However, The WYZE bubs, when on, turn themselves off every 4-5 minutes in the 20 minutes No Motion period, then turn back on after 20-30 seconds. Until the off rule turns them off. Log ID: 208920 ---
**Author:** ![QiS](https://avatars.discourse-cdn.com/v4/letter/q/b9bd4f/32.png) [@QiS](https://forums.wyze.com/u/QiS)\ **Post date:** [May 18, 2021, 8:43pm UTC](https://forums.wyze.com/t/2-20-app-beta-test-5-14-2021/181393/103 "2021-05-18T20:43:48Z")
I’m sorry I didn’t understand the scene you described. Do you mean that you set the bulbs to be turned on for 4-5 minutes then off? But they will be turned on automatically after 20-30s off. ---
**Author:** ![R.Good](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/r.good/32/107078_2.png) [@R.Good](https://forums.wyze.com/u/R.Good)\ **Post date:** [May 18, 2021, 9:06pm UTC](https://forums.wyze.com/t/2-20-app-beta-test-5-14-2021/181393/104 "2021-05-18T21:06:44Z")
Sorry, not my clearest description above. The rule is set to turn a bulb group on with motion detected by a V1 motion sensor Then set to turn the same Bulb group off if the area is clear for 20 minutes. In between that that time The Bulb Group is turning itself on and off every 4-5 minutes when they are just suppose to be on, until the area is clear for 20 minutes the rule will then turn the bulbs off and they will stay off until motion is detected again. ---
**Author:** ![spamoni](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/spamoni/32/34695_2.png) [@spamoni](https://forums.wyze.com/u/spamoni)\ **Post date:** [May 18, 2021, 9:26pm UTC](https://forums.wyze.com/t/2-20-app-beta-test-5-14-2021/181393/105 "2021-05-18T21:26:51Z")
Is it possible to get the ticket number? ---
**Author:** ![QiS](https://avatars.discourse-cdn.com/v4/letter/q/b9bd4f/32.png) [@QiS](https://forums.wyze.com/u/QiS)\ **Post date:** [May 18, 2021, 9:30pm UTC](https://forums.wyze.com/t/2-20-app-beta-test-5-14-2021/181393/106 "2021-05-18T21:30:52Z")
12255 ---
**Author:** ![QiS](https://avatars.discourse-cdn.com/v4/letter/q/b9bd4f/32.png) [@QiS](https://forums.wyze.com/u/QiS)\ **Post date:** [May 18, 2021, 9:32pm UTC](https://forums.wyze.com/t/2-20-app-beta-test-5-14-2021/181393/107 "2021-05-18T21:32:07Z")
12254 for 5 minute recording issue ---
**Author:** ![spamoni](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/spamoni/32/34695_2.png) [@spamoni](https://forums.wyze.com/u/spamoni)\ **Post date:** [May 18, 2021, 9:33pm UTC](https://forums.wyze.com/t/2-20-app-beta-test-5-14-2021/181393/108 "2021-05-18T21:33:05Z")
Thanks - do you have the one for the Live Streaming Issue? Edit: Oops… sorry - saw you provided it. ---
**Author:** ![QiS](https://avatars.discourse-cdn.com/v4/letter/q/b9bd4f/32.png) [@QiS](https://forums.wyze.com/u/QiS)\ **Post date:** [May 18, 2021, 9:33pm UTC](https://forums.wyze.com/t/2-20-app-beta-test-5-14-2021/181393/109 "2021-05-18T21:33:46Z")
Got it, We’ll look into it tonight. ---
**Author:** ![spamoni](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/spamoni/32/34695_2.png) [@spamoni](https://forums.wyze.com/u/spamoni)\ **Post date:** [May 18, 2021, 10:09pm UTC](https://forums.wyze.com/t/2-20-app-beta-test-5-14-2021/181393/110 "2021-05-18T22:09:54Z")
@QiS just finished setting up my Rules as described above. However, this is not an issue but not sure if it was intended. When I set the Rules, I named them Similarly to what was there originally and only disabled the original Trigger Rule. When I set the Time Constraint on the new Rule, It defaulted to the time constraint of the original rule. It did this for all the 10 Trigger Rules I setup. Is this the intended way it is supposed to work? ---
**Author:** ![Matthast](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/matthast/32/36821_2.png) [@Matthast](https://forums.wyze.com/u/Matthast)\ **Post date:** [May 18, 2021, 11:48pm UTC](https://forums.wyze.com/t/2-20-app-beta-test-5-14-2021/181393/111 "2021-05-18T23:48:08Z")
Over what sort of time period can we expect this rule engine migration to happen? Not trying to rush anything. Just curious because I’ve had the new beta installed on iOS for 3 days and I’m definitely still on the old engine. ---
**Author:** ![QiS](https://avatars.discourse-cdn.com/v4/letter/q/b9bd4f/32.png) [@QiS](https://forums.wyze.com/u/QiS)\ **Post date:** [May 19, 2021, 12:01am UTC](https://forums.wyze.com/t/2-20-app-beta-test-5-14-2021/181393/112 "2021-05-19T00:01:36Z")
Do you mean you have multiple rules and only set the time constraint for one of them, but the other rules were affected by the time constraint, event the time constraint was not applied to them? ---
**Author:** ![QiS](https://avatars.discourse-cdn.com/v4/letter/q/b9bd4f/32.png) [@QiS](https://forums.wyze.com/u/QiS)\ **Post date:** [May 19, 2021, 12:02am UTC](https://forums.wyze.com/t/2-20-app-beta-test-5-14-2021/181393/113 "2021-05-19T00:02:29Z")
It will be done within about 1 month after we release the official version. ---
**Author:** ![spamoni](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/spamoni/32/34695_2.png) [@spamoni](https://forums.wyze.com/u/spamoni)\ **Post date:** [May 19, 2021, 12:13am UTC](https://forums.wyze.com/t/2-20-app-beta-test-5-14-2021/181393/114 "2021-05-19T00:13:54Z")
Here is an example of what I did: I have an old Trigger Rule named: **Night - FR Motion Started** It is setup as follows: when motion detected on my Family Room motion sensor, turn on my Family Room Lights and my Color Bulb Notification Light (which is set Blue and cannot be changed with the previous rule engine) Between the hours of 10:01 pm to 3:25 am. I have an old Trigger Rule named: **Night - FR Motion Ended** It is setup as follows: when motion clears on my Family Room motion sensor, turn off my Family Room Lights and my Color Bulb Notification Light between the hours of 10:01 pm to 3:25 am. I disabled this rule and created 2 new rules as follows - Changed the name of the rules slightly: I setup a new Trigger Rule named: **Night Mode - FR Motion Started** It is setup as follows: when motion detected on my Family Room motion sensor, turn on my Family Room Lights and my Color Bulb Notification and set the color to Red. When I went to set the Time constraint, it was already set to the hours of 10:01 pm to 3:25 am. I did not enter this as it was a new Rule. I setup a new Trigger Rule named: **Night Mode - FR Motion Ended** It is setup as follows: when motion clears on my Family Room motion sensor, turn off my Family Room Lights and my Color Bulb Notification Light between the hours of 10:01 pm to 3:25 am. Again, this was a new rule and when I was going to enter the Time Constraint, it was automatically populated to the time the old Rule was set at. This was the same for all of the Trigger Rules I was creating. They mirrored the Times that were on the old Rules. - Some were set for 10:01 pm - 3:25 am - Some were set for 10:05 pm - 3:25 am - some were set for 5:01 am - 9:55 pm Note, I ended up changing my start time on the 10:01 Rules to 10:00 pm as I had an issue when I set the Rules to start at the top of the hour. Make sense? If you want me to send you a log or record what I did, please ask. The recording may be large, but I can possibly compress it with my editing tools. ---
**Author:** ![QiS](https://avatars.discourse-cdn.com/v4/letter/q/b9bd4f/32.png) [@QiS](https://forums.wyze.com/u/QiS)\ **Post date:** [May 19, 2021, 1:50am UTC](https://forums.wyze.com/t/2-20-app-beta-test-5-14-2021/181393/115 "2021-05-19T01:50:32Z")
Hi @spamoni Thanks for such a detailed explanation. Could you submit a log? We need this to dig deep. ---
**Author:** ![spamoni](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/spamoni/32/34695_2.png) [@spamoni](https://forums.wyze.com/u/spamoni)\ **Post date:** [May 19, 2021, 2:05am UTC](https://forums.wyze.com/t/2-20-app-beta-test-5-14-2021/181393/116 "2021-05-19T02:05:38Z")
Just did 209195 is the log number. I want to also let you know that the issue I was experiencing which precluded me from setting rules to start at 10pm, may have been corrected or at least, the problem does not exist now. The Rule to turn the lights on fired at 10pm when I moved around my family room. In addition the Color bulb was set to the Red as I wanted. So far everything is looking good. Great job, Will continue to test and provide feedback. ---
**Author:** ![spamoni](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/spamoni/32/34695_2.png) [@spamoni](https://forums.wyze.com/u/spamoni)\ **Post date:** [May 19, 2021, 9:53am UTC](https://forums.wyze.com/t/2-20-app-beta-test-5-14-2021/181393/117 "2021-05-19T09:53:58Z")
@QiS , I figured out what is happening. When you start a new rule from scratch and don’t open a previous rule the Time Constraint will default to the current time for start and end. However, if you open an existing rule with a time constraint and then close that rule and start to create a new rule, the default time constraint when you toggle the slider is set to the start and end time of the last rule you opened. It does not reset the time fields. Not sure if this is a bug or intended. Does this make sense? ---
**Author:** ![FullyChargedTech](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/fullychargedtech/32/41206_2.png) [@FullyChargedTech](https://forums.wyze.com/u/FullyChargedTech)\ **Post date:** [May 19, 2021, 12:19pm UTC](https://forums.wyze.com/t/2-20-app-beta-test-5-14-2021/181393/118 "2021-05-19T12:19:56Z")
Hi @QiS Please add my email to this test group. Thanks. ---
**Author:** ![cheaplikeafox](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/cheaplikeafox/32/9797_2.png) [@cheaplikeafox](https://forums.wyze.com/u/cheaplikeafox)\ **Post date:** [May 19, 2021, 12:28pm UTC](https://forums.wyze.com/t/2-20-app-beta-test-5-14-2021/181393/119 "2021-05-19T12:28:33Z")
I have the issue with wrong times with cam plus events as well but they are off by only a couple of seconds only. ---
**Author:** ![spamoni](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/spamoni/32/34695_2.png) [@spamoni](https://forums.wyze.com/u/spamoni)\ **Post date:** [May 19, 2021, 12:32pm UTC](https://forums.wyze.com/t/2-20-app-beta-test-5-14-2021/181393/120 "2021-05-19T12:32:52Z")
I saw the couple of seconds as well. But when it goes the full 5 minutes or multiple minutes the time difference is larger, in my case. BTW: did you get added to the Test Group? [Previous page](https://forums.wyze.com/t/2-20-app-beta-test-5-14-2021/181393.md?page=5) [Next page](https://forums.wyze.com/t/2-20-app-beta-test-5-14-2021/181393.md?page=7)